Performance advantages:
The oil mist collector adopts the principle of multi-stage and multi-layer filtration. The primary filter captures the oil mist above 10um, the secondary filter captures the oil mist above 2um, and the tertiary filter captures the oil mist above 0.3um. The rear end can be equipped with a high-efficiency filter, which mainly collects oil fume during processing.
2. The exterior wall paint adopts the production process of CNC machining center sheet metal parts, and adopts spraying treatment. Durable and easy to clean, will not fade, appear on the hulling area.
3. The running clean logo is an innovative product. When the oil mist collector is running, the red ball floats upward until it is adsorbed to the top. For example, when the device is turned off, the red ball sinks to the bottom. After running for a period of time, the filter cotton absorbs oil mist impurities. When the suction of the oil mist collector drops to 70%, the red ball will fall to the bottom, indicating that the filter cotton needs to be cleaned.
4. The vibration accuracy of the oil mist collector is related to the qualification rate of the parts produced during CNC machining. All have been thoroughly inspected and recorded air volume data, vibration accuracy, current and voltage, noise, equipment number and other related data.
5. The stability of the motor is the key component of the whole equipment. The supporting motor is produced by a well-known brand group company. All data are rigorously tested. The insulation grade is B grade, and the anti-corrosion grade reaches IP55.
The repair rate is only 0.5%. Motor warranty is 18 months.
6. All product parts are stamped by die.
7. Considering the length of use of the filter cotton, it will increase the operating cost of the user. The filter cotton used by our company is used for 2-3 years, during this period it can be cleaned and used continuously.
8. Operability, the filter cotton cleaning procedure is very simple. Just follow the cleaning procedure manual and you're done.
Use advantage:
1. Reduce the impact on employees:
The oil mist particles of 0.3~3.5UM will stay in the human body and cause harm to health.
2. Reduce work-related accidents:
Oil mist deposits make work areas, floors and walkways slippery and prone to fall accidents.
3. Reduce fire hazards:
Oil stains on walls, ceilings and equipment create a potential fire hazard.
4. Reduce the consumption of coolant:
The recovered oil mist can be reused, reducing the cost of coolant for the factory.
5. Influence on the machine tool:
May be the cause of a malfunction in the machine's internal and electrical systems.
6. Reduce fire hazards:
Oil stains on walls, ceilings and equipment create a potential fire hazard.
7. Reduce the consumption of coolant:
Recovered oil mist can be reused, reducing the economical cost of coolant for the plant
