Home > Products> CNC Turning Machine > Flat Bed CNC Lathe Machine

Flat Bed CNC Lathe Machine

Benefits of Flat Bed CNC Lathe Machine

The accuracy of the flat bed CNC lathe machine ensures consistent product quality

The process is more precise than manual machining and can be repeated in exactly the same manner over and over again.

Increased production speed and increased efficiency

Computers are used to control the machines, the process is automated therefore increasing speed and quality of manufacturing. Considering machines do not tire or need breaks it makes it more efficient than manual machining.

CNC machines is safety

Using flat bed CNC lathe machine are much safer than manually operated machines as they work behind a guard or even a closed, transparent safety door.

CNC Machining is more cost effective

Traditional machining requires one operator per machine. This type of machining requires fewer machine operators since one skilled operator can run several machines at one time. Since the CNC is so accurate it reduces errors from the manufacturing process and eliminates unnecessary waste.

Flat Bed CNC Turning

CK636/CK6136/CK636/CK6140/CK6150/CK6160/CK6163/CK6180/CK6183. Box way /Hard way type Horizontal CNC Lathe Machine

Add to Inquiry
Turning Lathe Machine

Turning cnc lathe machine horizontal. Model CK6150

Add to Inquiry
Turning Lathe CNC

Flat bed cnc turning lathe machine. KND/ GSK CNC Controller. Model CK6140

Add to Inquiry
Torno CNC Machine

Torno CNC Machine is one of the most important devices in the current manufacturing process. Our product is made of high-strength and high-quality raw materials, and have undergone certain

Add to Inquiry
Torno Machine CNC

Torno machine cnc turning lathe flat bed type. Model CK6150

Add to Inquiry
Horizontal Turning Center

CNC Lathe . Flat bed horizontal turning center. Model CK6150

Add to Inquiry

Why Choose us

Excellent Product Quality

Worldwide Famous Machine Parts Advanced CNC Controller Imported Precision Processing Equipment.

Rich Experience In Production

20+ Years Manufacturing Experience Exquisite Production Technology

After-Sales Service

Professional Service Teams 7x24 Hours Online Experienced Engineers

Major Components of a Flat Bed CNC Lathe Machine

Headstock

Different types of CNC Lathe Machines Like the Flat Bed CNC Lathe Machine uses Headstock, which is an important component of CNC Machine that drives the motor and powers the spindle. The front component of a CNC turning machine is made up of the headstock. The drive motor powers this spindle.

Tailstock

A CNC turning center’s opposite end is the tailstock. The aim of a tailstock attached directly to the bed is to provide support for longer workpieces. Hydraulic force is used to support the tailstock quill. The spindle continues to be the driving force and the tailstock follows the component. A tailstock is not suitable when face turning is required because the tailstock will get in the way.

Lathe bed

The bed is just a foundation plate that rests on the table and supports other machine components. The carriage is heat-treated to survive the machining impacts that runs over the bed.

Operational Processes for Flat Bed CNC Lathe Machine

● Cutting involves separating large amounts of material from a workpiece with a sharp-edged cutting tool.

● Deformation involves physically changing the shape of a workpiece by removing material from it.

● Drilling entails fitting a lathe with a drill bit that presses into the workpiece and digging a circular hole that can support bolts, screws, or other fasteners.

● Facing is a standard CNC lathe machine operation involving cutting the workpiece's surface with a tool that's secured on the machine's mounting system; this tool cuts away uniform amounts of material from the surface of a workpiece.

● Knurling involves using a roller with raised spikes that pierce holes into a workpiece's surface to make it more attractive through texturing.

● Sanding is used for finishing, where workpieces are rotated against a tool bit attached to a CNC lathe machine, with parts utilizing abrasive material like sandpaper to smooth the surface by removing tiny amounts of material from the surface.

● Turning is when a workpiece "turns" or rotates against a stationary cutting tool, one of the flat bed CNC lathe machine parts.

Flat Bed CNC Lathe Machine Machining Applications

CNC milling

There are many ways in which drilling can be performed utilizing a CNC lathe machine, programming it to perform counter-bore, miniature, through-hole, or other types of drilling.

CNC turning

Performed to remove material around the axis or in the circular cutting motion when machining spherical or cylindrical workpieces. It involves using a motorized spindle to mount and rotate the chuck; the cutting tool mounts to the tool post in this CNC lathe machine operation, with the turning set at the control panel and based on CNC programming.

Surface finishing

Flat bed CNC lathe machine programming can assist with dimensional accuracy and stability when finishing product surfaces.

Our Company

202105141044425960041e701e4829a416cbf4b64ab781

Our Certificate of Honor

2021051115430179077f84d23a4ef7b036232c982610f7

20210709150027ac3cad87121d4f5e8036639016817d63

FAQ

Q: What is the main requisites of a lathe bed ?

A: Lathe bed is made of high-grade cast iron having approx tensile strength of 30 kgf/mm² & with hardness of BHN 201. We can say, bed is cast and usual process of pattern making and molding etc.

Q: What is the function of the bed of a lathe ?

A: The lathe bed provides a rigid foundation for the entire machine and holds the headstock, tailstock and carriage in alignment. Lathe beds are usually made of fine-grain cast iron. The machined and ground surfaces of the bed on the carriage and tailstock slide are called ways.

Q: What are the advantages of a slant bed lathe ?

A: There's much more to the slant bed lathe story than enhanced chip flow or larger part size. There's also increased productivity, reduced machining costs, and better part quality.

Q: What 3 PPE should be used when using a lathe ?

A: Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Gloves must not be worn when using this machine. Sturdy footwear must be worn at all times in work areas.

Q: What is the biggest safety rule concerning the lathe ?

A: Keep all body parts away from all rotating parts. Never wear loose-fitting clothing or jewelry while operating a lathe. Tie back and contain all long hair. Use guards to protect from accidental contact with rotating parts.

Q: What is a flat bed lathe ?

A: Flat bed CNC lathe is mainly used for heavy-duty turning and is widely used for machine complex geometries, short shafts, discs, and other workpieces. In addition, it can machine a variety of internal and external threads in metric or imperial units.

Q: What is the function of bed in CNC machine ?

A: The bed section of the CNC lathe can improve the chip evacuation conditions. At the same time, the cross-sectional shape adopts a closed box structure, thereby increasing the outer contour size of the bed section, so that the bed body has high bending and torsional rigidity.

Q: What angle is a lathe bed ?

A: Typically, the bed of the lathe slants at a 30- or 45-degree angle, although some 60-degree models also are available.

Q: Which material is best for a lathe bed ?

A: Lathe beds are usually manufactured with Cast iron or Mild steel. In case of extremely large machines, the bed may be in two or more pieces, bolted together to from the desired length. Lathe Bed is heavy rigid structure which is having high damping capacity for the vibrations generated by machines during machining.

Q: Which type of lathe machine is mostly used and why ?

A: Engine lathe machine is the most popular type of lathe machine. You can find it inside any manufacturing workshop. Nowadays the machine is driven by an electric motor but back in the 19th-century people used steam engines to drive the machine.

Q: What are the different types of lathe beds ?

A: Types of beds include inverted "V" beds, flat beds, and combination "V" and flat beds. "V" and combination beds are used for precision and light duty work, while flat beds are used for heavy duty work. When a lathe is installed, the first step is to level it, which refers to making sure the bed is not twisted or bowed.

Q: When the lathe vibrates ?

A: Without good footing, any lathe will vibrate and rattle during operation. All four legs need to have a good reliable connection with the floor. If even one leg is off the floor, just a hair, it can cause vibration. To make this simpler, be sure first thoroughly to clean the floor of any dust and debris.

Q: What are the safe operating procedures for CNC lathe ?

A: Ensure that the material workpiece is secured before turning. Ensure that the coolant system is operational before turning. Ensure all robotic tool array movements remain unobstructed during the turning operation. Never leave the CNC lathe in operational mode while unattended.

Q: What should be done prior to operating a lathe ?

A: Remove all tools, measuring instruments and other objects from saddle or lathe bed before starting machine. Keep all lathe cutting tools sharp. Ensure that the chip and coolant shields are in place. Shut off the power supply to the motor before mounting or removing accessories.

Q: Should you wear gloves when operating a lathe ?

A: Never wear gloves when operating machinery with accessible rotating or other moving parts. This includes, but is not limited to, most woodworking and machining equipment such as drill presses, lathes, sanders, jointers, milling machines, grinders, and roll forming machines.

Q: Which of the lathe requires very high skills for operation ?

A: Which of the following lathe requires very high skills for operation? Explanation: Centre lathe is much more typical than other lathe machines and hence requires much more skills.

Q: Why are flat beds curved ?

A: Flatbeds are arched so when a heavy load is set on trailer it will level out the flatbed. If there was no arch the trailer would bow down from the weight of the load.

Q: What is swing over bed on a lathe ?

A: Swing over bed: The diameter of the largest workpiece that can be rotated on the spindle without hitting the bed. This is the first of the two numbers used to describe the size of a metal lathe. In the case of the 7×10 or 7×12 lathes, it is 7″.

Q: What is the material of CNC bed ?

A: At present most of the machine beds are made of grey cast iron material which has certain drawbacks.

Q: What is a slant lathe ?

A: He slant bed CNC lathe is a type of lathe that belongs to the family of computer numerical control (CNC) lathes. This type of lathe machines parts using computer software, which uses alphanumeric characters and runs along the XYZ axes, to shape a part.

We're professional flat bed cnc lathe machine manufacturers and suppliers in China, specialized in providing high quality products. We warmly welcome you to buy or wholesale cheap flat bed cnc lathe machine for sale here from our factory. For price consultation, contact us.