1. When loading and unloading the workpiece, the tool must be removed, and the cutting head and hands must not approach the milling surface.
2. When using the Xuzheng milling machine to set the tool, it must be slow forward or hand cranked, fast forward is not allowed, and the tool is not allowed to stop when moving.
3. Pay attention to whether the handle of the Xuzheng milling machine will hit people when moving the tool quickly.
4. The feed is not allowed to be too fast, and it is not allowed to change speed suddenly. The limit stop of the Xuzheng milling machine should be adjusted.
5. The Xuzheng milling machine must be stopped when moving up and down, measuring the workpiece, adjusting the tool, and tightening the speed change.
6. When disassembling the end mill, the work surface should be padded with wood, and the nut should be flattened, and the force should not be too strong.
7. It is strictly forbidden to touch or wipe the rotating parts and knives with cotton yarn.
8. Generally, a chuck can only clamp one workpiece at a time. Because a chuck clamps more than one workpiece at a time, even if the clamping is tight, the force is very large when the tool is coarsely fed, and the two workpieces are easily slipped between them, causing the workpiece to fly out, the knife is broken, and the accident is injured.
